Free ballistic tool

MPBR & Optimal Zero Calculator

Find the zero that keeps your predicted trajectory inside a chosen target zone—then verify it at the range.

Choose a load and target zone

Factory-equivalent examples are starting points, not measured data for your rifle. Edit velocity and BC to match your ammunition.

A 6-inch diameter means a ±3-inch allowance. This calculation assumes a level shot in still air, without dispersion or zero error.

Atmosphere · 59°F · 29.92 inHg · 0% humidity

Use measured station pressure, not sea-level pressure. Its altitude effect is already included; no second altitude correction is applied.

6.5 Creedmoor · 140 gr ELD Match

2710 fps · G7 BC 0.315 · 1.75 in sight height · 6 in zone · 59°F · 29.92 inHg station pressure · 0% humidity

Maximum point-blank range
279.0 yd
Suggested far zero
237.6 yd
Near zero
28.2 yd
100-yard impact
2.67 in high

Predicted path stays within ±3.0 inches from the muzzle to 279.0 yd.

Peak: 3.00 inches high at 135.0 yd.

Numerical estimate, not a guaranteed hit or hunting-distance recommendation. Wind, group size, zero error and range uncertainty are not included. Confirm your actual zero and downrange impacts; rounded distances are approximate.

Trajectory inside the target zone

Height above or below the line of sight, in inches. Shaded band: ±3.0 inches.

Trajectory table · 25-yard steps
Predicted bullet height relative to point of aim
Range (yd)Path (in)Inside zone
0-1.75Yes
25-0.18Yes
50+1.08Yes
75+2.04Yes
100+2.67Yes
125+2.97Yes
150+2.94Yes
175+2.55Yes
200+1.81Yes
225+0.70Yes
250-0.79Yes
275-2.67Yes
300-4.95No

Keep your profiles and range cards on your phone

Atlas Ballistics for iPhone adds saved rifle and ammo profiles, offline range cards, and truing from your real shots.

Get Atlas for iPhone

Free to download. Your website inputs are not automatically imported into the app.

How to use your optimal zero

Start with a load example, then enter your measured muzzle velocity and the matching G1 or G7 coefficient. Measure sight height from the bore center to the optic center. Enter the full target-zone diameter, not its radius.

The suggested far zero places the top of the trajectory just inside the upper boundary. The near zero is its first crossing of your line of sight; MPBR is where it falls through the lower boundary. The 100-yard impact provides a starting point for sighting in at a shorter range.

This is a vertical trajectory envelope for level, still-air conditions, not a model of the entire shot group. Leave room for dispersion and uncertainty. Wind and terminal performance must be assessed separately; MPBR alone does not establish a suitable hunting distance.

Frequently asked questions